1240 Calibration resistor

• Features

  • Range 10 μΩ ... 100 kΩ
  • Low capacitance and low inductance design
  • Suitable for direct current and technical frequencies
  • High stability < ± 0.01 % over years

• Product data

  Model	1240
  Resistance value	10 μΩ 25 μΩ 50 μΩ 100 μΩ 200 μΩ 500 μΩ 1 mΩ 2 mΩ 5 mΩ 10 mΩ 20 mΩ 50 mΩ 100 mΩ 200 mΩ 500 mΩ 1 Ω 2 Ω 5 Ω 10 Ω 20 Ω 50 Ω 100 Ω 200 Ω 500 Ω 1 kΩ 2 kΩ 5 kΩ 10 kΩ 20 kΩ 50 kΩ 100 kΩ
  Tolerance	± 0.02 % ± 0.03 % ± 0.05 % ± 0.1 % ± 1 %
  Temperature coefficient	≤ ± 10 ppm/K
  Storage stability	< ± 0.01 % over years
  Power	2.5 W
  Range of operating temperature	0 ... +23 ... +40 °C
  Specific characteristics	Low capacitance and low inductance design Suitable for direct current and technical frequencies High stability < ± 0.01 % over years

• Description

  The 0.02 class calibration resistors excel in their modern design and small mechanical dimensions. Their ruggedness also ensures a long life. Calibration resistors of the 1240 series are used wherever very constant operating standards are required. 
  
  Typical main areas of application therefore include:

  • When normal resistors prove to be too large scale
  • For test and calibration of resistance measurement devices
  • For tests on electrical temperature measuring equipment
  • For laboratory setup of a Wheatstone bridge
  • As shunt resistor for accurate current measurement
  • As part of standard equipment in research laboratories
  • For a large part of measurements in calibration laboratory.

  A test certificate according to ISO 9000 with detailed technical data is included in the scope of delivery of these high-quality calibration resistors.

  DKD/DAkkS Calibration Certificate

  The calibration laboratory D-K-15141-01-00 at burster praezisionsmesstechnik gmbh & co kg is supervised by DAkkS (Deutsche Akkreditierungsstelle GmbH) according to ISO 17025. 
  It can prove its status by a certificate and is authorized to issue calibration certificates with the DAkkS logo and with the DKD logo (Deutscher Kalibrierdienst). 
  These calibration certificates are internationally approved by multilateral contracts.

  Manufacturer Calibration Certificate

  Please refer to DKD/DAkkS Calibration Certificate but with reduced accuracy. The calibration resistors can also be delivered with a manufacturer calibration certificate. It confirms the traceability of the used secondary voltage and resistance standards to the national standards according to DIN ISO 9000ff and is guaranteed by our certified calibration laboratory (D-K-15141-01-00).

• Data Sheet & Downloads

  Data sheet

  1240

  DEEN

Related products

RESISTOMAT® 2304

RESISTOMAT® 2316

RESISTOMAT® 2329

RESISTOMAT® 2320