Robusto, affidabile, maneggevole, molto preciso, design estremamente compatto, per applicazioni statiche e dinamiche (non rotante)
Please notice that there is a limit of 5 products for the product comparison.
Your latest selection was canceled.
×
Model | 8627 |
Principle | Non-rotating |
Measuring range |
0 … ± 500 Nm |
Signal output | 1 mV/V |
Mechanical connection |
Both ends with flag |
Electrical connection |
6 pins plug connection |
Protection class | IP50 |
Range of operating temperature | -15 ... +55 °C |
Specific characteristics |
|
This torque sensor is qualified for static and dynamic measurements on non-rotary applications.
Further the measurement of reaction torques on rotating machine parts is possible. Especially the torque sensors with flanges are preferred. They are mounted between motor and stator, e.g. in agitator drives. This enables a maintenancefree torque measurement.
For individual measuring tasks the design of our torque sensors can be adapted to the customer’s installation conditions.
More application examples:
The design has been optimized regarding overall length, weight and volume, so that axial forces up to relatively high limit values and bending moments of up to 20 % of the measuring range have only a small effect to the influence of the measuring element. Four metal film strain gauges are mounted on the measuring element and connected to form a full bridge. When applying AC or DC voltage on the bridge, the mechanical value torque is converted into electrical voltage. The necessary amplifier either delivers a norm signal (0 … 10 V, 0/4 … 20 mA) or – with indicator module – a torque signal truly corresponding to the measured variable.
The sensor output signal is standardized, so that an exchange of the sensor (spare part) does not require any new adjustment of the measuring chain.
The option burster TEDS (electronic data sheet, programmed memory chip) allows a quick configuration of compatible sensor electronics.
Torque Sensors: Made in Germany - Made by burster
Via Repubblica, 10
24035 Curno
Italy
Fon: +39/035/618120
Fax: +39 035618250
infoburster.it
www.burster.it
burster präzisionsmesstechnik
gmbh & co kg
Talstraße 1-5
76593 Gernsbach
DEUTSCHLAND
Kontakt:
Telefon: (+49) 07224-6450
Telefax: (+49) 07224-64588
E-Mail:
infoburster.de
Messtechnisch die Lösung.
Mit diesem Anspruch beliefert das international agierende Messtechnik-Unternehmen burster seit mehr als einem halben Jahrhundert vom Entwicklungs- und Produktionsstandort Deutschland namhafte Kunden in der ganzen Welt mit Sensoren, Präzisionsmessgeräten und Messsystemen zur Sensorsignalverarbeitung.
Wo Qualitätssicherung und Produktions-Überwachung eine Rolle spielen,
ist burster mit dabei.