RESISTOMAT® 2316 Milliohmmetro per produzione e laboratorio

• Features

  • Campo di misura da 2 mΩ a 200 kΩ
  • Risoluzione fino a 0.1 μΩ
  • Precisione 0.03 % Rdg.
  • Autorange
  • Temperatura compensata per tutti i tipi di materiale
  • Compensazione termica e.m.f.
  • Protezione da tensione di ingresso 400 V_rms
  • Interfaccia RS232 e PLC  (USB e Ethernet opzionale)

• Product data

  Model	2316
  Measuring range	2 mΩ 20 mΩ 200 mΩ 2 Ω 20 Ω 200 Ω 2 kΩ 20 kΩ 200 kΩ
  Resolution	0.0001 mΩ 0.001 mΩ 0.01 mΩ 0.0001 Ω 0.001 Ω 0.01 Ω 0.1 Ω 1 Ω 10 Ω
  Measurement accuracy	0.03 % rdg.
  Measurement display	21 000 counts
  Automatic temperature compensation	Yes
  Comparator	Yes
  Interfaces	RS232 PLC USB (option) Ethernet (option)
  Specific characteristics	Autorange Temperature compensation for all materials Thermal e.m.f. compensation Input voltage protection up to 400 Vrms

• Description

  Fast and accurate measurements of the smallest resistance values are possible with the milliohmmeter RESISTOMAT^® model 2316. Due to the rugged aluminium injection moulding desktop housing with membrane keypad it is suitable for use in laboratory and industrial environment likewise. Wires and coils can be measured with temperature compensation. The temperature of the sample is measured with a Pt100 or pyrometer and the resistance is then corrected to the equivalent at e.g. 20 °C (adjustable) in the instrument.

  The application range is very wide such as the measurement of:

  • transformer motor coil windings
  • coils of all kind
  • cables and wires on the drum or as meter samples
  • switch and relay contacts
  • heating elements
  • fuses
  • connections and transitions at power rails and many more

  For a cooling curve recording with freely selectable time interval a data logger for up to 1000 values is available. The complete control via RS232 interface enables the setup of fully automatic test stations. The instrument features a PLC interface for integration into production process control classification and makes selection of the samples an easy task.

  The device works according to the proven 4-wire measurement method which eliminates errors caused by test lead and contact resistances. Thermo voltages that might be in the measurement circle would be compensated automatically by this measurement method. The control of the measurement leads is done with an integrated cable fraction detection.

  A temperature compensation for any given sample material such as copper, aluminium, tungsten, etc. is self-evident. The temperature measurement is done by an external Pt100 sensor or by an external infrared measurement device (ref. to accessories). A special measurement voltage input protection was developed for testing large inductive samples so that voltage peaks do not cause permanent damage while pinching off the sample.

  16 device settings such as the measurement range, limit values, temperature coeffi cient, etc. can be saved in order to test samples with different parameters in an automatic measurement system. All device specifi c settings are shown to the user via display. Calling up the settings is done via keypad or via PLC interface with a bit pattern (4-bits). It goes without saying that all device settings may also be effected via the available interfaces. 

  The high-contrast LCD display with backlight assures very good reading of the measurement value in dark as well as bright spaces.

• Data Sheet & Downloads

  Data sheet

  2316

  DEENCNPLRU

  Operation manual

  2316

  DEEN

  Short manual 2316

  DEENESFRIT

  Software

  PC configuration software demo V2018.1.0.0

  DEEN

  PC configuration software 2316-P001 V2018.1.0.0 (password-protected)

  DEEN

  Instruments driver and programming examples (X86)

  EN

  Version information Instrument Driver (X86)

  EN

  Instruments driver and programming examples (X64)

  EN

  Version information Instrument Driver (X64)

  EN

  Further info

  RESISTOMAT® ready for any job

  DEEN

  Wire resistance measurement with burster ohmmeter

  CN

  WCTI Technical Achievement Award 2010 for burster ohmmeter

  EN

  GOST certificate

  RU

  Quality leading the way - to the best solution for you - measurement applications for automotive industries

  DEEN

• Accessories

  19“-3U rack mounting kit

  DEEN
  Program selection switch

  DEEN
  External foot switch

  DEEN
  Infrared temperature module

  DEEN
  Measurement leads, 4 pin

  DEEN
  Pt100 temperature sensor for RESISTOMAT®

  DEEN
  Adapter for the calibration resistors series 1240

  DEEN

• Videos

  Clamping devices for stranded copper cables, aluminium and copper wires

  Wire 2016 Exhibition Video

  
  

  Youtube channel

• LINKS & CAD DATA

  CAD data model 2316

  CAD data accessories for measuring instruments

• Press information

  New allround device for resistance measurement leaves nothing to be desired

  

  Resistance measurement and RESISTOMAT^® are both terms that indispensably belong together. burster presents with its good value RESISTOMAT^® 2316 a tough, universal and compact resistance measurement device that suits to applications in rough industry…

  to text and downloads  

  To all press infos

Related products

1240