8431, 8432 Miniature tension and compression load cell

• Features

  • Small dimensions
  • For tension and compression forces
  • Temperature compensation starting at -55 °C and up to 200 °C optional
  • Minimum lateral sensitivity due to supporting membranes
  • Relative non-linearity: ≤ ±0.15 % F.S.
  • Measurement ranges from 0 ... 2.5 N to 0 ... 100 kN
  • Model 8432 with overload protection for directions tension and compression
  • burster TEDS optionally available

• Product data

  Model	8431, 8432
  Measuring range	8431 0 … 5 N 0 … 10 N 0 … 20 N 0 … 50 N 0 … 100 N 0 … 200 N 0 … 500 N 0 … 1 kN 0 … 2 kN 0 … 5 kN 0 … 10 kN 0 … 20 kN 0 … 40 kN 0 … 50 kN 0 … 100 kN 8432 0 … 2.5 N 0 … 5 N 0 … 10 N 0 … 20 N 0 … 50 N 0 … 100 N 0 … 200 N 0 … 500 N 0 … 1 kN 0 … 2 kN
  Direction of force	Tension and compression
  Standardization	Option
  Signal output	8431 15 … 40 mV/V 0.4 mV/V 0,5 mV/V 2 mV/V depending on measuring range 8432 15 … 40 mV/V 0.4 mV/V 0,5 mV/V 2 mV/V depending on measuring range
  Protection class	IP65
  Overload protection	8431 No 8432 Yes
  Pull-plate	No
  Load introduction button	No
  Range of operating temperature	-55 ... +120 °C
  Specific characteristics	Small dimensions Temperature compensation starting at - 55 °C and up to 200 °C optional Minimum lateral sensitivity due to supporting membranes burster TEDS optionally available

• Description

  Precise tension and compression force measurements can be performed in limited space with model 8431 and 8432 precision miniature load cells. High precision, various measuring ranges, convenient load application via threaded pins with external winding and small dimensions offer a wide scope of applications in laboratories and production.
  
  The series are among our most precise and yet mechanically sturdy miniature load cells. All options, typical only for larger load cells, are available with this miniature series such as hermetically sealed construction, overload protection and boring for pressure compensation when applied under vacuum.
  
  Its complex design with integrated support membranes and overload protection reduces additional construction effort for external overload protection or guidance of force of applied parts in many applications. This requires little space, has little material and weight and almost no component friction, which could falsify the measurement result.
  
  The connection cable suitable for robot applications make the precision miniature load cells especially suitable for use in the areas of special purpose

  • Machinery manufacture
  • Tool manufacturing
  • Handling gear

  The force to be measured is applied to the cylindrical sensor unit in the tension or compression direction by means of the two external threads. This means that the sensor must be mounted without any attachments touching the end faces of the sensor housing. This avoids excessive contact pressures on the material and tensions inside the sensor that would affect its measuring element. Please refer to the sensor user manual for guidance on the various options for fitting the sensor, which depend amongst other factors on its measurement range. Although the precision miniature load cell is designed to isolate the measuring element from external forces, torsion and bending moments should be avoided.

  Two stabilizing support diaphragms inside the sensors for small measurement ranges minimize the effect of transverse forces and moments and ensure long-term mechanical stability for measurements. The network for temperature compensation or standardization of the output signal is located on a sheathed circuit board in a wider section of the sensor's connecting cable. The maximum static operational force is the maximum force in the direction of the measurement axis that the sensor can tolerate. The overload protection is not designed for frequent use of the sensor in the overload range or for sudden loads. The sensors work in any orientation. They have an active side which acts directly on the measuring element, whereas the passive side is fixed to the housing.

• Data Sheet & Downloads

  Data sheet

  8431_8432

  DEENJPPL

  Brochure

  Load sensors for production, automation, R&D and quality assurance

  DEEN

  Applications

  Haptic test on high quality control elements

  DEEN

  Operation manual

  8431_8432

  DEEN

  Further info

  Detection of tearing on solar cells

  DE

  Load experts

  DEEN

• Accessories

  Rod ends with internal/external thread for force introduction

  DEEN

• Videos

  Example showing load cell fitted under pre-load using quick-change device

  
  

  Youtube channel

• LINKS & CAD DATA

  CAD data model 8431 / 8432

  CAD data accessories for load cells

Related products

9250

SENSORMASTER 9163

9206

DIGIFORCE® 9311

DIGIFORCE® 9307